Euphonix S5 CM403 Instrukcja Konfiguracji Pobierz pdf (Strona 6)

Euphonix System 5 Post and Film Setup Guide

ID selection

Up to four CM403 modules can be installed in a System 5 console. Set the ID switches

on the back panel of the module according to Table 1:

Table 1 CM403 ID Switch Settings

NOTE: In a dual-operator console, all CM403 modules are connected to the master

console, which is used for monitoring and record control.

External Record Control

The Euphonix EXT 25-pin connector on the rear panel of the CM403 accepts two

external closures:

Table 2

The +5V output on the connector is internally protected by a 200 mA self-resetting fuse.

The active-high switch inputs are TTL-level inputs with 100 K pull-down resistors.

CM403 # Frame ID Module ID

Position # in

eMix

1 1H 13 1–29

2 1H 14 1–30

3 1H 15 1–31

4 1H 16 1–32

Function Switch Input +5 V

Record In Pin 25 Pin 13

Record Out Pin 11 Pin 13

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Brak uwag

Euphonix S5 CM403 Instrukcja Konfiguracji Strona 6